Table of Contents
Advertisement
CR Console Operation Manual
EI/DI display field
*
*
* The displayed button and its operation differ depending on the settings performed at installation.
For details, see [4.6 Completing Image Edit].
NOTE
• Displaying either
installation. When
setting.
Display property settings of QA buttons in a palette or QA image controller buttons can be set in
"User Utility".
Refer to [Chapter 10 CUSTOMIZING THE SCREEN DISPLAY / CR Console OPERATION
MANUAL - THE USER UTILITY OPERATIONS].
2 - 26
: The EI and DI (defined in IEC 62494-1:2008) of the displayed image
are displayed.
The EI and DI can be displayed only for normal images (except
mammography images). They do not appear for energy subtraction
images, long-view images, etc. When an image is replaced with other
one, the values are updated accordingly.
The EI/DI display field can be repositioned by moving the □ mark.
Whether the EI/DI display field is displayed or not depends on the
setting made at the time of installation.
NOTES
• In case that a cassette-type Image Reader is used, the EI and DI
values are displayed properly only when the type of the IP is ST-
VN, ST-VI, or ST-BD.
• When using the EI and DI values for image quality management,
calibrations of Image Readers should be carried out periodically.
• The EI and DI may vary if a wrong exposure menu was selected.
: Saves edited image information.
: Terminates image information editing and returns to the previous
screen.
or
/
varies depending on the setting performed at
/
is displayed, select
and then
to reflect the
2010. 10 897N0519K
Advertisement
Table of Contents
