CR Console Operation Manual
2.1 Starting Up and Shutting Down the CR Console
This section explains how to start up and shut down the CR Console. Be sure to start up peripheral
devices which are required for the work as well as the Image Reader and display.
2.1.1 Starting Up the CR Console
Turn on the display, then turn on the personal computer.
The application software of the CR Console automatically starts. When the Patient Information Input
Screen is displayed, startup is completed. Depending on the setting of the User Utility, the
"Examination Order Issuance Screen" is displayed.
NOTES
• Do not start up the CR Console before turning on the CR exposure unit. Otherwise, a message
indicating a communication error may appear on the CR Console.
• Be sure to turn on the display first, then turn on the personal computer.
Note that the touch panel may not respond accordingly.
We recommend that you use the equipment with the display turned on.
• User authentication may be required to log into the system, depending on the setting performed at
installation.
2 - 2
2009. 09 897N0519H