CR Console Operation Manual
6.1 Error Messages
Explained below are error messages.
If an error which cannot be handled or the same error recurs frequently, contact our service engineer.
(1) If an Error Occurs on This Equipment
If an error occurs on this equipment, an error message box is displayed on the screen. In such an
instance, check error details and select "OK" in the box, and then take an appropriate action.
(2) If an Error Occurs on Destination Device
If an error occurs on destination device,
instance, operate as follows.
Select
.
Status of the device targeted for output in which an error resulted will be displayed.
Check the device status, select
"Error display box"
6 - 2
is displayed in the lower right of the screen. In such an
, and then take an appropriate action.
2006. 10 897N0519C