FujiFilm CR Console Operation Manual page 18

CR Console Operation Manual
Table 4
Recommended separation distances between Portable and mobile RF communications
The CR-IR 348CL is intended for use in the electromagnetic environment in which radiated RF disturbances
are controlled.
The customer or the user of the CR-IR 348CL can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and the CR-IR
348CL as recommended below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 : At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 : These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
1 - 8
equipment and the CR-IR 348CL
Separation distance according to frequency of transmitter
150 kHz~80 MHz
d = 1.2 P
0.12
0.38
1.2
3.8
12
m
80 MHz~800 MHz
d = 1.2 P
0.12
0.38
1.2
3.8
12
800 MHz~2.5 GHz
d = 2.3 P
0.23
0.73
2.3
7.3
23
2009. 09 897N0519H