Table of Contents
Advertisement
If you set only 10 minutes of drying
after washing, the appliance
calculates also the duration of the
anti-crease and the cooling phases.
2. Press the Start/Pause button to start the
programme.
In the display the indicator
door is locked. The display shows a new time
value regularly.
End of the drying programme
The appliance stops automatically. The acoustic
signals operate (if they are active).
For more information see "End of the drying
programme" of the previous chapter.
1. Remove the laundry from the appliance.
Make sure that the drum is empty.
2. Keep the door ajar to prevent mildew and
odours.
Fluff in the drum
During the washing and/or drying phase, some
types of fabric, (sponge, wool, sweatshirt) could
release fluff.
The released fluff could stick to the fabrics
during the next cycle.
To prevent fluff in your laundry, we recommend
that you:
• Do not wash dark fabrics after you have
washed and dried light coloured fabrics (new
sponge, wool, sweatshirt ) and vice versa.
• Line dry these types of fabrics when they are
washed the first time.
• Clean the drain filter.
• Clean the empty drum, the gasket and the door
with a wet cloth after the drying phase.
How to remove fluff
To remove the fluff inside the drum, set a special
programme:
1. Empty the drum.
2. Clean the drum, the gasket and the door with
a wet cloth.
30
comes on. The
3. Set the rinse programme.
4. Press the Spin button and the Time dry button
simultaneously to activate the cleaning function
until the display shows CLE.
5. Press the Start/Pause button to start the
programme.
Washer Dryer User Manual
Hide quick links:
Advertisement
Table of Contents
