Behaviour Of The Appliance; Starting A Programme With The Delay Start; Cancelling The Delay Start; Interrupting A Programme And Changing An Option - John Lewis JLWD 1613 User Manual

The relevant indicator stops flashing and stays
on.
On the display the indicator of the phase in
operation starts to flash.
The programme starts, the door is locked. The
display shows the indicator
The drain pump can operate for a
short time as the appliance fills with
water.

Behaviour of the appliance

After approximately 15 minutes
from the start of the programme:
• The appliance adjusts the cycle
time automatically to the laundry
load to achieve perfect washing
results in the shortest possible
time.
• The display shows the new time
value.
Starting a programme with
the delay start
1. Press the Delay start button repeatedly until
the display shows the number of minutes or
hours of delay required.
The related indicator comes on.
2. Press the Start/Pause button.
The appliance starts the countdown of the delay
start.
When the countdown is completed, the
programme starts automatically.
Before you press the Start/Pause
button to start the appliance, you
can cancel or change the setting of
the delay start.

Cancelling the delay start

To cancel the delay start:
1. Press the Start/Pause button to pause the
appliance.
The related indicator flashes.
Washer Dryer User Manual
.
2. Press the Delay start button repeatedly until
the display shows .
3. Press the Start/Pause button again to start the
programme immediately.
Interrupting a programme and
changing an option
You can change only some options before they
operate.
1. Press the Start/Pause button.
The related indicator flashes.
2. Change the option set.
3. Press the Start/Pause button again.
The programme continues.
Cancelling a running
programme
1. Press the On/Off button to cancel the
programme and to deactivate the appliance.
2. Press the On/Off button again to activate the
appliance.
Now, you can set a new washing programme.
Before starting the new
programme the appliance could
drain the water. In this case, make
sure that the detergent is still in the
detergent compartment, if not fill
the detergent again.
Opening the door when a
programme or the delay start
operates
If the temperature and level of the
water in the drum are too high
and/or the drum still rotates you
cannot open the door.
While a programme or the delay start operates,
the appliance door is locked.
1. Press the Start/Pause button.
The related door lock indicator goes off.
2. Open the appliance door.
25