Checking The Position Of The Flap; Activating The Appliance; Setting A Programme; Starting A Programme Without The Delay Start - John Lewis JLWD 1613 User Manual

Checking the position of the
flap
1. Pull out the detergent dispenser until it stops.
2. Press the lever down to remove the dispenser.
3. To use powder detergent, turn the flap up.
4. To use liquid detergent, turn the flap down.
B
24
1
2
A
With the flap in the down
position:
• Do not use gelatinous or
thick liquid detergents.
• Do not pour more liquid
detergent than the limit
shown on the flap.
• Do not set the prewash
phase.
• Do not set the delay start
function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.

Activating the appliance

1. Connect the mains plug to the mains socket.
2. Open the water tap.
3. Press the On/Off button to activate the
appliance.
A short tune sounds.

Setting a programme

1. Turn the programme dial and set the
programme:
• The related programme indicator comes
on.
• The Start/Pause indicator flashes.
• The display shows: the default
temperature, the spin speed, the indicators
of the programme phases and the
programme duration.
2. If necessary, change the temperature, the spin
speed, the cycle duration, or add available
options. When you activate an option, the
indicator of the set option comes on.
If you set something incorrectly,
the display shows the message Err.
Starting a programme without
the delay start
Press the Start/Pause button to start the
programme.
Washer Dryer User Manual