Options; On/Off; Programme Dial; Temperature - John Lewis JLWD 1613 User Manual

Options

On/Off

Press this button to activate or deactivate the
appliance. A tune sounds when the appliance is
activated.
The Auto Stand-by function automatically
deactivates the appliance to decrease the energy
consumption when:
• You do not use the appliance for 5 minutes
before you press the Start/Pause button.
All settings are cancelled.
Press the On/Off button to activate the
appliance again.
Set the washing programme and all possible
functions again.
• 5 minutes after the end of the washing
programme.
Refer to "Auto Stand-by option".

Programme dial

Turn this dial to set a programme. The related
programme indicator comes on.

Temperature

Press this button repeatedly to adjust the default
temperature.
The indicator indicates the cold water.
The display shows the set temperature.

Spin

Press repeatedly this button to decrease the
default spin speed or to set the available spin
options.
The display shows the indicator of the set
speed.
20
Additional spin options:
No Spin
• Set this option to remove all spin phases.
• Recommended for very delicate fabrics.
• To compensate for the absence of spinning, the
rinse phase uses more water for some washing
programmes.
• The display shows the indicator
Rinse Hold
• Set this option to reduce creasing.
• The washing programme ends with water in the
drum. The drum turns regularly to reduce
creasing.
• The door stays locked. You must drain the
water to unlock the door.
• The display shows the indicator
To drain the water, refer to
"Draining water out after end of
cycle".

Dryness level

Press this button to set one of 3 automatic
dryness levels available. The display shows the
symbol of the set level:
• Iron dry – laundry to be ironed
• Cupboard dry – laundry to be put in
storage
• Extra dry – laundry to be fully dried
You cannot set all automatic
levels for each type of fabric
(see pages 16-17).
.
.
Washer Dryer User Manual