Configure A G-240W-G Indoor Ont; General; Hgu Mode Gui Configuration; Login - Nokia 7368 Product Manual

7368 ISAM ONT G-240W-G Product Guide

7 Configure a G-240W-G indoor ONT

7.1 General

Please refer to the configuration information provided with your OLT for the software
configuration procedure for a G-240W-G ONT.
For HTTP configuration procedures, please refer to the 7368 ISAM ONT
Configuration, Management, and Troubleshooting Guide.

7.2 HGU mode GUI configuration

Use the procedures below to use the web-based GUI for the G-240W-G in HGU
mode. This mode is preset at delivery.
A home gateway unit (HGU) is a home networking device, used as a gateway to
connect devices in the home through fiber to the Internet. An HGU provides a variety
of features for the home network including routing and firewall capability. By using
the HGU, users can connect all smart equipment in their home, including personal
computers, set-top boxes, mobile phones, and other consumer electronics devices,
to the Internet.
7.2.1
Use the procedure below to login to the web-based GUI for the G-240W-G.
Procedure 6
1
Issue: 01
Release 05.08.01a | August 2018 | Edition 01
7.1 General
7.2 HGU mode GUI configuration
7.3 SFU mode configuration

Login

Login to web-based GUI
Open a web browser and enter the IP address of the ONT in the address bar.
The login window appears.
The default gateway IP address is http://192.168.1.254. You can connect to this IP address
using your web browser after connecting your PC to one of Ethernet ports of the ONT. The
static IP address of your PC must be in the same 192.168.1.x subnet as the ONT.
3FE-47555-AAAA-TCZZA
Configure a G-240W-G indoor ONT
71