Safety Information - Nokia 7368 Product Manual

Install a G-240W-G indoor ONT
•
•

5.5 Safety information

Read the following safety information before installing the unit.
60
Release 05.08.01a | August 2018 | Edition 01
drill and drill bits
paper clip
Hazardous electrical voltages and currents can
Danger 1 —
cause serious physical harm or death. Always use insulated
tools and follow proper safety precautions when connecting or
disconnecting power circuits.
Make sure all sources of power are turned off and
Danger 2 —
have no live voltages present on feed lines or terminals. Use a
voltmeter to measure for voltage before proceeding.
Always contact the local utility company before
Danger 3 —
connecting the enclosure to the utilities.
This equipment is ESD sensitive. Proper ESD
Warning —
protections should be used when removing the fiber access
cover of the indoor ONT.
Keep indoor ONTs out of direct sunlight. Prolonged
Caution —
exposure to direct sunlight can damage the unit.
Observe the local and national laws and regulations
Note 1 —
that may be applicable to this installation.
Observe the following:
Note 2 —
•
The indoor ONT should be installed in accordance with the
applicable requirements of the NEC or CEC. Local
authorities and practices take precedent when there is
conflict between the local standard and the NEC or CEC.
•
The indoor ONT must be installed by qualified service
personnel.
•
Indoor ONTs must be installed with cables that are suitably
rated and listed for indoor use.
•
See the detailed specifications in the
sheet for the temperature ranges for these ONTs.
3FE-47555-AAAA-TCZZA
7368 ISAM ONT G-240W-G Product Guide
G-240W-G unit data
Issue: 01