Figure 46 Us Classifier Rules Window - Nokia 7368 Product Manual

Configure a G-240W-G indoor ONT
(2 of 2)
7
8
9
10
Figure 46
114
Release 05.08.01a | August 2018 | Edition 01
Field
Destination IP
Source Port
Destination Port
Protocol
Priority
Configure the US classifier.
At least one field must be selected to create a classifier. A maximum of four fields may be
selected to create a classifier; this includes the interface field.
Click Save.
To delete a classifier, click the Delete option for the applicable classifier in the classifier table.
A classifier can only be deleted if it is not associated with any classifier rules.
Select the Classifier Rules tab, as shown in Figure 46.
All classifier rules are displayed in the classifier rules table in the window.
US Classifier Rules window
3FE-47555-AAAA-TCZZA
7368 ISAM ONT G-240W-G Product Guide
Description
Click to enter a destination IP
Click to enter a source port
Click to enter a destination port
Click to enter a protocol
Choose a priority level from 1 to 8. The lower the number, the higher the
priority. No more than 1 classifier can be created with the same priority.
Issue: 01