Nokia 7368 Product Manual page 111

Intelligent services access manager ont
Hide thumbs Also See for 7368:
Table of Contents

Advertisement

7368 ISAM ONT G-240W-G Product Guide
(2 of 2)
2
3
4
5
Procedure 27
The US Classifier feature is used to create policies, classifiers, and classifier rules for upstream
traffic handling. This feature is available to admin users (super users) only.
A policy defines an action to be performed on a set of LAN or WAN packets. A policy can be
created at any time and then subsequently assigned to one or more classifiers.
A classifier is used to select key fields for which the classifier rules will be written. A classifier can
be created at any time and then subsequently assigned to one or more classifier rules.
A classifier rule is used to assign actions to a group of packets based on a set of parameters. A
classification rule must be created against a pre-defined classifier.
Up to 16 policies can be created, with up to 8 classifiers and 32 classifier rules.
1
Issue: 01
Release 05.08.01a | August 2018 | Edition 01
Field
Description
Forwarding Policy
Enter the number for the forwarding policy (range: 1-7)
Additional fields for L3
Protocol
Choose a protocol from the drop-down menu, or select the Exclude checkbox
Application
Choose an application from the drop-down menu
Source IP and
Enter the values for the source IP and IP mask, or select the Exclude checkbox
Source IP Mask
Destination IP and
Enter the values for the destination IP and IP mask, or select the Exclude checkbox
Destination IP Mask
Source Port and
Enter the values for the source port and port max (highest port number) or select the
Source Port Max
Exclude checkbox
Destination Port and
Enter the values for the destination port and port max (highest port number), or select
Destination Port Max
the Exclude checkbox
Choose a QoS type from the drop-down menu: L2 or L3.
Configure a QoS policy.
Click Add to add a QoS policy.
STOP. This procedure is complete.
Upstream (US) Classifier configuration
Select Network > US Classifier from the top-level menu in the GPON Home Gateway
window, and select the Policy tab, as shown in Figure 44.
All classifier policies are displayed in the policy table in the window.
3FE-47555-AAAA-TCZZA
Configure a G-240W-G indoor ONT
111

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7368 isam ont g-240w-c

Table of Contents