7368 ISAM ONT G-240W-G Product Guide
Procedure 30
1
Figure 49
IP filter window
Table 40
Issue: 01
Release 05.08.01a | August 2018 | Edition 01
IP filter configuration
Select Security > IP filter from the top-level menu in the GPON Home Gateway window, as
shown in Figure 49.
Table
40
describes the fields in the IP filter window. If the firewall level is not set to advanced,
the IP filter rules are not available.
IP filter parameters
Field
Mode
Internal Client
Local IP Address
Source Subnet Mask
Remote IP Address
Destination Subnet Mask
Protocol
3FE-47555-AAAA-TCZZA
Description
Choose an IP filter mode from the drop-down menu:
•
Drop for upstream
•
Drop for downstream
Choose an internal client from the drop-down menu:
•
Customer setting - uses the IP address input below
•
IP - uses the connecting devices' IP to the ONT
Local IP address
Source subnet mask
Remote IP address
Destination subnet mask
Choose an application protocol or all from the drop-down menu
Configure a G-240W-G indoor ONT
119