Figure 52 Dmz And Alg Window; Table 43 Dmz And Alg Parameters - Nokia 7368 Product Manual

7368 ISAM ONT G-240W-G Product Guide
Procedure 33
1
Figure 52 DMZ and ALG window
Table 43
2
3
4
Issue: 01
Release 05.08.01a | August 2018 | Edition 01
DMZ and ALG configuration
Select Security > DMZ and ALG from the top-level menu in the GPON Home Gateway
window, as shown in Figure 52.
Table 43 describes the fields in the DMZ and ALG window.
DMZ and ALG parameters
Field Description
ALG Config Select the checkboxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
DMZ Config
WAN Connection List Choose a WAN connection from the drop-down menu
Enable DMZ Select this checkbox to enable DMZ on the chosen WAN connection
DMZ IP Address Choose Customer Setting and enter the DMZ IP address or choose the IP address
of a connected device from the drop-down menu
Configure ALG.
Click Save ALG.
Configure DMZ.
3FE-47555-AAAA-TCZZA
Configure a G-240W-G indoor ONT
125