Procedure; Figure 17 G-240W-G Indoor Ont Connections - Nokia 7368 Product Manual

7368 ISAM ONT G-240W-G Product Guide

6.6 Procedure

Use this procedure to replace a G-240W-G indoor ONT.
1
2
Figure 17 G-240W-G indoor ONT connections
Wall
mounting
hole
Issue: 01
Release 05.08.01a | August 2018 | Edition 01
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
i Use the RTRV-ONT command to verify the ONT status and th associated services.
Record the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
ii If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
If used, disable the Wi-Fi service by pressing the WLAN button; see Figure
of the WLAN button.
TEL1 TEL2
LAN1 LAN2
POTS Ethernet
ports (2) ports (4)
(RJ-11) (RJ-45)
3FE-47555-AAAA-TCZZA
WPS LED
POWER WLAN RESET
LAN3 LAN4 USB1 USB2
USB Power Wireless
ports (2) on/off
button
Replace a G-240W-G indoor ONT
17
Wall
mounting
hole
Fiber optic
port
Wi-Fi security
buttons
ON/OFF
Reset On/off
button button
for the location
28302
67