Meeting Control; Panelists; Mute/Unmute - Grandstream Networks IPVT10 User Manual

•
If the WebRTC user joins an IPVideoTalk meeting with host code before the meeting starting time,
the user will be the meeting host until leaving the meeting.
•
If the user joins an IPVideoTalk meeting by pressing the URL in host Email, the user will join the
meeting as meeting host as default.
Notes:
▪ Meeting's hosts have the same privileges including all options in Meeting Control and ability to end
the meeting.
▪ Meeting's hosts can mute/unmute and remove each other out of the meeting.

Meeting Control

During the meeting, WebRTC user could apply to be the meeting host to control the meeting.

Panelists

1. Select a participant in Participants Lists.
2. Click on the button
3. Select "Set as Panelist" to set the participant to be a panelist.
When the participant is set as a panelist, the user will obtain some new privileges:
•
The user could unmute himself even if muted by the Webinar host.
•
The user could start presentation at any time during an IPVideoTalk Webinar.
•
The user could share the webcam at any time during an IPVideoTalk Webinar.
•
The user could check the Participants List. (This will not be affected by Meeting Control option).
•
The user could chat with all panelists in the same group, and private chat with all participants. (This
will not be affected by Meeting Control option).

Mute/Unmute

•
Mute all
Click on button at the bottom right corner and select "Mute all". There will be a prompt showing "Mute
all success". All participants on the Participants list will be muted except the host. Please note participants
who join the meeting via GVC32XX device cannot be muted. Users could also click on Settings button
at the upper right corner, and click on "Mute All" option to mute all participants.
next to the participant's name.
IPVT10 User Guide
Version 1.0.2.8
P a g e | 78