Exit Meeting; Host; Become Meeting Host; Meeting Control - Grandstream Networks IPVT10 User Manual

3. The Webinar host/panelists could add more additional comments for the answered questions.
4. When the new participants join into the Webinar, they will receive all questions and answers which
are in public.
5. The panelists could answer the questions which are sent by themselves, in order to show the typical
Q&As to other participants.
6. The Webinar host could click the on the icon "Forbid Participants Send Questions" on the right
upper corner during the Webinar and allow users to send questions during another period.
7. For any question, it does not allow two Webinar hosts/panelists to answer in live mode at the same
time.

Exit Meeting

Users could tap on icon

Host

Become Meeting Host

Click on the icon on the left upper corner and select the "Host meeting" option.
1.
Enter the correct host code to be the new host. To find host code, the user could go to IPVideoTalk
2.
Portal to find the host code of the meeting, or, if the host has filled up host Email when scheduling the
meeting, the Email notification will list the host code there. Host Code is also found in Meeting Info
during a meeting of the GVC32XX host.
Once host code is submitted successfully, this WebRTC user will become the host and other
3.
participants will receive the prompt "XXX is now the host".

Meeting Control

During the meeting, Mobile user could apply to be the meeting host to control the meeting.

Panelists

1. Select a participant in Participants Lists.
2. Long pressing the screen on the name of the panelist, the menu will be shown up.
at the upper right corner to exit meeting at any time.
IPVT10 User Guide
Version 1.0.2.8
P a g e | 107