Grandstream Networks IPVT10 User Manual page 47

 Display Name
This is used to set the display name for the IPVideoTalk ID on GVC32XX. When the user uses this
device to dial out, the callee will see the display name.
 Personal Room Number
Each GVC32xx device has one Personal Room Number, the instant meeting/meeting now will use this
Personal Room Number to start the meeting. The participants could join into the meeting via this
Personal Room Number any time.
 Personal Room Password
Each GVC32xx device has one Personal Room Password, the default password is none. If the owner
sets the Personal Room Password, all participants need to input the correct password to join into the
Personal Room. Users could update the Personal Room Password, or login IPVideoTalk Portal to
update the Personal Room Password.
 IPVideoTalk Service Address
If the users would like to use the Enterprise internal deployed server, or try our trial service system
(which might not be as stable as the official IPVideoTalk platform), please obtain the trial service
address from Grandstream and enter it here.
 Device Code
This is a six-digit code for the device to link to IPVideoTalk Portal quickly. Authentication response is
not required for the GVC32XX user to link the device if device code is entered in IPVideoTalk Portal.
 Number
This is the IPVideoTalk ID number assigned by IPVideoTalk cloud system and it cannot be edited.
Other IPVideoTalk ID users could dial this number to join the meeting. If the IPVideoTalk ID on the
GVC32XX fails to obtain association with the IPVideoTalk cloud system, this field will show the MAC
address of GVC32XX instead of IPVideoTalk ID number. In this case, please check your network
connection, network settings, or trial service settings on the GVC32XX to make sure it has properly
connected to the IPVideoTalk platform over the Internet.
 Business
This is used to show the enterprise name if the user has linked the device on IPVideoTalk Portal.
 Save
After editing, users need to save the configuration by pressing the yellow shortcut key on GVC remote
control, or selecting the "Save" option at the top right corner to have the changes take effect.
IPVT10 User Guide
Version 1.0.2.8
P a g e | 46