5. Dial
When the user clicks on this option, the user will be directed to dialing interface, input other GVC's
IPVideoTalk ID to dial out and the meeting will be created immediately.
6. Notices
This is used to receive the notices from IPVideoTalk cloud system. Users can check system messages here.
7. Settings
This is used to configure IPVideoTalk ID related settings. Users may activate the IPVideoTalk ID, edit display
name and check device code.
Contacts
After the users link the IPVideoTalk ID on the IPVideoTalk Portal, the users could check the business
contacts here (if the contact exists in IPVideoTalk Portal). The contacts are centrally managed in the
IPVideoTalk Portal, and GVC32XX can sync up with the IPVideoTalk Portal for the contacts in IPVideoTalk
Portal. Currently, the users cannot directly edit the business contacts on GVC32XX.
Group
This is used to check the contacts under this group.
Contacts
This is used to check the detailed information of the contacts, such as name, phone number, Email
address and so on. The green dot represents "online, and the grey dot represents "offline".
Figure 16: IPVideoTalk Application→Contacts
IPVT10 User Guide
Version 1.0.2.8
P a g e
| 42