Beckman Coulter Allegra 6 Series Instruction Manual page 3

!
SAFETY NOTICE
This safety notice summarizes information basic to the safe operation of the equipment
described in this manual. The international symbol displayed above is a reminder that all
safety instructions should be read and understood before installation, operation, mainte-
nance, or repair of this centrifuge. When you see the symbol on other pages, pay special
attention to the safety information presented. Observance of safety precautions will also
help to avoid actions that could damage or adversely affect the performance of the
centrifuge.
Safety During Installation and/or Maintenance
This centrifuge weighs 51.7 kg/114.0 lb (nonrefrigerated benchtop), 75.8 kg/167.0 lb
(refrigerated benchtop), or 90.3 kg/199.0 lb (refrigerated kneewell). DO NOT attempt
to lift or move it without assistance from another person.
Be sure to use the anchoring system to secure the centrifuge in place. The anchoring
system is designed to reduce the possibility of injury or damage that could result from
centrifuge movement in the event of a major rotor mishap.
Any servicing of this equipment that requires removal of any covers can expose parts
which involve the risk of electric shock or personal injury. Make sure that the power
switch is off and the centrifuge is disconnected from the main power source, and refer
such servicing to qualified personnel.
Do not replace any centrifuge components with parts not specified for use on this
instrument.
Electrical Safety
To reduce the risk of electrical shock, this equipment uses a three-wire electrical cord and
plug to connect the centrifuge to earth-ground. To preserve this safety feature:
• Make sure that the matching wall outlet receptacle is properly wired and earth-
grounded. Check that the line voltage agrees with the voltage listed on the name-rating
plate affixed to the centrifuge.
• Never use a three-to-two wire plug adapter.
• Never use a two-wire extension cord or a two-wire non-grounding type of multiple-
outlet receptacle strip.
Do not place containers holding liquid on or near the chamber door. If they spill, liquid
may get into the centrifuge and damage electrical or mechanical components.
Safety Against Risk of Fire
Certain electrical circuits within this equipment are protected by fuses against overcurrent
conditions. For continued protection against the risk of fire, replace only with the same
type and rating specified.