Interlogix TVP-5101 Configuration Manual page 9

You can activate a password via a web browser and via TruVision Device Manager
(included on the CD to find the IP address of the camera).
Activation via the web browser:
1. Power on the camera and connect the camera to the network.
2. Input the IP address in the address bar of the web browser, and click
the activation interface
Note:
 The default IP address of the camera is 192.168.1.70.
 For the camera to enable DHCP by default, you must activate the camera via
TruVision Device Manager. Please refer to the following section, "Activation via
TruVision Device Manager".
3. Enter the password in the password field.
Note: A valid password range must be between 8 and 16 characters. You can use a
combination of numbers, lower and upper case letters, and special characters : _
- , . * & @ / $ ? Space. The password must contain characters from at least two of
these groups. We also recommend that you reset your password regularly. For high
security systems, it is particularly recommended to reset the password monthly or
weekly for better protection.
4. Confirm the password
5. Click OK to save the password and enter the live view interface.
Activation via the web browser:
1. Run the TruVision Device Manager to search for online devices.
2. Check the device status from the device list, and select the inactive device.
TruVision IP Compact PTZ Camera Configuration Manual
Enter to enter
7