Changing Channels; Using P+ / P- On The Remote Control Unit; Using 0 To 9 On The Remote Control Unit; Changing The Volume And Sound - Pioneer PDP-507XDA Operating Instructions Manual

Watching TV

Changing channels

Use the remote control or the control panel on the right-hand side
of the plasma display to change channels.
Channel display
AAA
STEREO
STANDARD
FULL
Using P+ / P– on the remote control unit
• Press P+ to increase the channel number.
• Press P– to decrease the channel number.
When viewing Teletext information:
• Press P+ to increase the page number.
• Press P– to decrease the page number.
See also Using the Teletext Functions on pages 57 and 58.
Note
• Press CH RETURN to switch back to the previous channel.
Press CH RETURN again to return to the current channel.
• The CHANNEL +/– buttons on the plasma display work in the
same way as P+ / P–.
• P+ / P– cannot pick up analogue channels that are set to skip.
For analogue channel skip, see steps 13 and 14 under "Setting
up analogue TV channels manually" (page 28).
• While watching DTV, P+/P– can pick up preset channels in the
Programme List but not in the Favourite List.

Using 0 to 9 on the remote control unit

• Select channels directly by pressing buttons 0 to 9.
For example:
To select channel 2 (1-digit channel), press 2.
To select channel 12 (2-digit channel), press 1 then 2.
To select channel 123 (3-digit channel), press 1, 2 then 3.
When viewing Teletext information:
• View a page directly which is 3-digit page number from 100 to
899 by pressing buttons 0 to 9. See also page 57.
8
Note
• Press CH RETURN to switch back to the previous channel.
Press CH RETURN again to return to the current channel.
• After entering a channel number you can press CH ENTER to
tune in the channel more quickly.
• In standby, when you press 0, the power turns on and images
come from the INPUT 1 source. Or, when you press any button
from 1 to 9, TV images display.

Changing the volume and sound

Use the remote control or the control panel on the right-hand side
of the plasma display to adjust the volume.
Using i + / i – on the remote control unit
• To increase the volume, press i +.
• To decrease the volume, press i –.
Volume adjustment
• VOLUME +/– on the plasma display operates the same as
i + / i –.

Using e on the remote control unit

• Press e to mute the sound.
e appears on the screen.
Muting
• Press e again or i + to restore the sound.
06
21
En