Using The 3Dyc And I-P Mode; Sound Adjustments; Treble; Bass - Pioneer PDP-507XDA Operating Instructions Manual

08 Setting up

Using the 3DYC and I-P Mode

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Others" (/ then ENTER).
5 Select an item to be adjusted (/ then ENTER).
• You can select "3DYC" or "I-P Mode".
6 Select the desired parameter (/ then ENTER).
3DYC
Optimises characteristics for separating brightness signals and colour signals.
This works for both video and still images.
Selections Off
High
Mid
Low
I-P Mode
Performs optimum conversion from interlace signals to progressive signals.
This works for both video and still images.
Selections 1
2
3
7 Press HOME MENU to exit the menu.
Note
• The 3DYC setting is ineffective when SECAM, PAL-M, PAL-N or
4.43 NTSC signals are input.
• For the I-P Mode, the individual parameters are not selectable
for the following input signals: 480p, 720p@60 Hz, 576p,
720p@50 Hz, 1080p@24 Hz.
• For the 3DYC, the individual parameters are selectable only
when you have selected the analogue tuner, or you have
selected INPUT 1, 2, 3 or 5 as the input source and there is a
video signal present.
34
En
Deactivates 3DYC.
Enhanced 3DYC
Standard 3DYC
Moderate 3DYC
Optimum for video images
Standard setting
Optimum for still images

Sound adjustments

You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV Selection
option. See page 30.
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select an item to be adjusted (/).
4 Select the desired level (/).
Sound STANDARD

Treble

Bass

Balance

Reset

FOCUS
Front Surround
Headphone Output
Sub Volume
 button
Item
Treble
For weaker treble
Bass
For weaker bass
Balance
Shifts the audio balance to
the left.
5 Press HOME MENU to exit the menu.
Note
• You cannot adjust the sound quality for listening with
headphones.
• If you perform sound adjustments with headphones
connected, the new settings will become effective as soon as
you disconnect the headphones.
• To restore the factory defaults for all items, press / to
select "Reset" in step 3, and then press ENTER. A confirmation
screen appears. Press / to select "Yes", and then press
ENTER.
2
0
0
Off
Off
Main
15
 button
For stronger treble
For stronger bass
Shifts the audio balance to
the right.