08
Setting up
Language setting
For the language to be used in the TELETEXT mode while watching
an analogue TV channel, you can select from among West Europe,
East Europe, Greece/Turkey, Russia, and Arabia.
1
Press HOME MENU.
2
Select "Setup" (/ then ENTER).
3
Select "Language" (/ then ENTER).
4
Select a language (/).
Language
Teletext
5
Press HOME MENU to exit the menu.
Note
• TELETEXT language supported by DTV is only English.
AV Selection
Select from the six viewing options, depending on the current
environment (e.g., room brightness), the type of the current TV
programme, or the type of images input from external equipment.
1
Press HOME MENU.
2
Select "Picture" (/ then ENTER).
3
Select "AV Selection" (/ then ENTER).
4
Select the desired option (/ then ENTER).
AV Selection
STANDARD
DYNAMIC
MOVIE
GAME
SPORT
USER
30
En
For AV source
Item
STANDARD
DYNAMIC
MOVIE
West Europe
GAME
SPORT
USER
For PC source
Item
STANDARD
USER
5
• You can also press AV SELECTION on the remote control to
• If you have selected "DYNAMIC", you cannot select "Contrast",
Basic picture adjustments
Adjust the picture to your preference for the chosen AV Selection
option (except DYNAMIC).
1
2
3
Description
Well defined image in a normally lit room
This setting is shared by the external inputs and TV
input sources.
Sharp imaging with the maximum contrast
Note that this mode does not allow manual image
quality adjustment.
This setting is shared by the external inputs and TV
input sources.
Optimised for movies
This setting is shared by the external inputs and TV
input sources.
Lowers image brightness for easier viewing.
This setting is shared by the external inputs and TV
input sources.
Optimised for sports programmes
This setting is shared by the external inputs and TV
input sources.
Allows the user to customise settings as desired. You
can set the mode for each input source.
Description
Well defined image in a normally lit room
Allows the user to customise settings as desired.
Press HOME MENU to exit the menu.
Note
change the viewing option.
"Brightness", "Colour", "Tint", "Sharpness", "Pro Adjust", and
"Reset"; these menu items are dimmed.
Press HOME MENU.
Select "Picture" (/ then ENTER).
Select an item to be adjusted (/ then ENTER).
Picture
AV Selection
Contrast
Brightness
Colour
Tint
Sharpness
Pro Adjust
Reset
STANDARD
40
0
0
0
0
Need help?
Do you have a question about the PDP-507XDA and is the answer not in the manual?