Connecting A Personal Computer; Displaying An Image From A Personal Computer; Connecting An Amplifier/Av Receiver - Pioneer PDP-507XDA Operating Instructions Manual

Using with other equipment

Connecting a personal computer

Use the PC terminals to connect a personal computer.
• The PC input terminal is DDC1/2B-compatible.
PDP-427XDA (rear)
Stereo
mini jack cable
PC

Displaying an image from a personal computer

To watch an image coming from the personal computer, press PC
on the remote control unit or use the INPUT button on the plasma
display to select PC.
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image
does not come in clearly, you may need to use Auto Setup menu.
See page 46.
Note
• The PC terminals cannot be used for audiovisual equipment.
Resolution Frequency
720 x 400 70 Hz
640 x 480 60 Hz
72 Hz
75 Hz
800 x 600 56 Hz
60 Hz
72 Hz
75 Hz
1024 x 768 60 Hz
70 Hz
75 Hz
60 Hz
1360 x 768

Connecting an amplifier/AV receiver

You can enjoy more powerful sound by connecting an amplifier/
AV receiver and subwoofer to the plasma display.
3 4
RGB cable
• For details, refer to the operation manual for the audio
• If your amplifier/AV receiver has subwoofer output, it is not
• Audio signals corresponding to the currently displayed images
• Audio from a connected subwoofer is muted when you have
• No audio signals are output to the DIGITAL OUT terminal when
PDP-427XDA (rear)
Optical digital
cable
Stereo audio
cable
Audio cable
Subwoofer
Note
equipment to be connected.
necessary to connect the subwoofer output on the plasma
display.
are always output to the MONITOR OUT and SUBWOOFER
terminals.
selected "Sub" for "Headphone Output" (page 35) and
connected headphones.
connected only to the HDMI terminal for INPUT 3 or INPUT 4.
11
3 4
Amplifier/
AV receiver
53
En