Changing Channels; Changing The Volume And Sound - Pioneer pdp-506hdg Operating Instructins

Basic Operations
06
Media Receiver
(front view)
STANDBY/ON
Channel display
Media Receiver
(front view)
STANDBY/ON
Volume adjustment
22
En
ON STANDBY
- + - +
INPUT VOLUME CHANNEL
CHANNEL +/–
1 2 3
4 5 6
7 8 9
CH CH
0
RETURN ENTER
P
RETURN HOME MENU
8
AAA
STEREO
10:00
STANDARD
FULL
ON STANDBY
- + - +
INPUT VOLUME CHANNEL
VOLUME +/–
7 8 9
CH CH
0
RETURN ENTER
P
Muting

Changing channels

Using P +/P – on the remote control unit
• Press P + to increase the channel number.
• Press P – to decrease the channel number.
When viewing Teletext information:
• Press P + to increase the page number.
• Press P – to decrease the page number.
For Teletext, see "Using the Teletext Functions" on pages 42
and 43.
NOTE
• CHANNEL +/– on the Media Receiver operates the same as
P +/P –.
• P +/P – cannot pick up channels that are set to skip. For
Channel Skip, see steps 13 and 14 under "Using Manual
Adjust" (page 28).
Using 0 – 9 on the remote control unit
Select channels directly by pressing buttons 0 to 9.
EXAMPLE
• To select channel 2 (1-digit channel), press 2.
• To select channel 12 (2-digit channel), press 1 then 2.
When viewing Teletext information:
View a page directly which is 3-digit page number from 100 to
899 by pressing buttons 0 to 9. See page 42.
NOTE
• After entering a channel or subchannel number, you may
press CH ENTER to tune in the channel more quickly.
• In the standby mode, when you press 0, the power turns on
and images come from the INPUT 1 source. Or, when you
press any button from 1 to 9, TV images display.

Changing the volume and sound

–
Using i +/i on the remote control unit
• To increase the volume, press i +.
• To decrease the volume, press i
NOTE
• VOLUME +/– on the Media Receiver operates the same as
–
i +/i
.
Using e on the remote control unit
e mutes the current sound output.
1
Press e.
• "e" appears on the screen.
2
Press e again to cancel the mute mode.
• Pressing i + also cancels the mute mode.
–
.