Pioneer PDP-507XDA Operating Instructions Manual page 55

Using with other equipment
For INPUT 4, connect just an HDMI cable - this carries both the
audio and video signals.
PDP-427XDA (rear)
HDMI device
Activating the INPUT 3 HDMI terminal
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "HDMI Input" (/ then ENTER).
4 Select "Setting" (/ then ENTER).
5 Select "Enable" (/ then ENTER).
Item Description
Disable (default) Deactivates the INPUT 3 HDMI terminal.
Enable
Activates the INPUT 3 HDMI terminal.
6 Press HOME MENU to exit the menu.
Note
• You need not activate the INPUT 4 HDMI terminal.
To specify the type of digital video signals:
1
2
3
3 4
HDMI cable carrying
the HDMI mark
4
To specify the type of audio signals:
When using the INPUT 3 HDMI terminal, you need to specify the
type of audio signals.
1
2
3
4
Repeat steps 1 to 3 provided for "Activating the INPUT 3
HDMI terminal".
Select "Video" (/ then ENTER).
Select the type of digital video signals (/ then ENTER).
• If you select "Auto", an attempt will be made to identify the
type of digital video signals when digital video signals are
received.
Item Description
Auto (default)
Automatically identifies input digital video signals.
Colour-1
Digital Component Video signals (4:2:2) locked
Colour-2
Digital Component Video signals (4:4:4) locked
Colour-3
Digital RGB signals locked
Press HOME MENU to exit the menu.
Note
• If you select a parameter other than "Auto", make such a
setting that results in natural colour.
• If no image appears or images appear in inappropriate colours,
specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
Repeat steps 1 to 3 provided for "Activating the INPUT 3
HDMI terminal".
Select "Audio" (/ then ENTER).
Select the type of audio signals (/ then ENTER).
• If you select "Auto", an attempt will be made to identify the
type of audio signals when audio signals are received.
Item Description
Auto (default)
Automatically identifies the input signals.
Digital
Accepts digital audio signals.
Analogue
Accepts analogue audio signals.
Press HOME MENU to exit the menu.
Note
• The INPUT 4 HDMI terminal accepts only digital audio signals.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analogue audio cables.
11
55
En