Reconfiguring The Dtv Channel Settings; Quick Scan (Designating The Scanning City/Region); Auto Scan (No Scanning City/Region Designated) - Pioneer PDP-507XDA Operating Instructions Manual

Enjoying DTV broadcasts
Restricted and above
• Programmes contain inappropriate content for children under 18.
Note
• You can select "DTV Setup" only while viewing DTV channels.
• The Parental Control setup becomes effective when you first
tune in a TV channel after entering the settings.
• When you select the Parental Rating option other than "No
Block", the password entry screen appears depending on the
programme received. Enter your 4-digit password using
buttons 0 to 9 (see page 49).
• When you select "No Block", Parental Control does not
function in any way.

Reconfiguring the DTV channel settings

This section describes how to reconfigure the DTV channel
settings after setting up DTV channels using Auto Installation
(page 27). You can select "DTV Setup" only while viewing DTV
channels.
Note
• You can select "DTV Setup" only while viewing DTV channels.
Quick Scan (designating the scanning city/
region)
If you live in one of the cities or regions listed in the "Quick Scan"
menu, select your city or region and start scanning all available
digital channel signals.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "DTV Setup" (/ then ENTER).
4 Select "Installation" (/ then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
5 Select "Quick Scan" (/ then ENTER).
• Select your city or region from Adelaide, Brisbane,
Melbourne, Perth, Sydney, Batchelor, Canberra, Darwin,
Newcastle, Wollongong, Hobart or HobartNE.
Quick Scan
Auto Scan
Manual Scan
Quick Scan
Clear All Data
Adelaide
Brisbane
Melbourne
Perth
Sydney
Batchelor
Canberra
6 Select the city or region (/ then ENTER).
• Channel search automatically starts. If any new channel is
found, it is automatically registered on the plasma display.
Scan Status
CH 8
Scan Percentage
Signal Strength
• To quit a channel scan in progress, press RETURN. If you quit
scanning halfway, all channels may not be registered properly.
Make sure to repeat scanning again until it is completed.
Note
• You can select "DTV Setup" only while viewing DTV channels.
• If the city or region where you live in is not on the list, select
"Auto Scan".
• The channel frequencies in each city/region are preset in the
tuner's database. If the frequency is changed by the local TV
station or a new channel commences broadcasting, you will
have to find these channels using "Manual Scan" (see page 42)
or "Auto Scan".
Auto Scan (No scanning city/region
designated)
Auto Scan searches for digital programmes on receivable
channels through the VHF and UHF bands without designating the
city or region you live in.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "DTV Setup" (/ then ENTER).
4 Select "Installation" (/ then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
5 Select "Auto Scan" (/ then ENTER).
• A confirmation screen appears.
Quick Scan
Auto Scan
Manual Scan
Clear All Data
Auto Scan will take more
than 10 minutes.
Do you want to continue?
Yes
09
10%
No
41
En