Troubleshooting - Lang SELECTRONIC Installation, Operation And Maintenance Instructions

Gas griddle, spark ignition
Table of Contents

Advertisement

10.1 Symptoms
The chart below is to assist in the troubleshooting of the griddle.
Refer to the Symptoms column to locate the type of failure then to the Possible
Cause for the items to be checked.
To test for a possible cause, refer to the TEST section (on the following page) and
locate the Possible Cause then refer to test to identify test procedures.
Entire griddle not lighting
Power indicator is not lit
Section will not heat
Product burning
Product under done
Doesn't ignite
SYMPTON

TROUBLESHOOTING

POSSIBLE CAUSE
Failed regulator or plugged regulator vent
Failed transformer
No power to cord outlet
Griddle unplugged from outlet
Failed power cord or plug
Failed power switch
Failed pilot light
Failed gas valve
Failed spark module
Failed circuit board
Failed temperature sensor
Plugged pilot orifice
Product is cooked too long
Failed temperature sensor
Failed circuit board
Failed temperature selector
Open wire between selector and circuit board
Failed temperature sensor
Failed circuit board
Failed temperature selector
Incorrect Gas pressure
Failed igniter
Improper gas pressure
No power
Failed spark module
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

236schg chrome236s260s224s248s272s

Table of Contents