Equipment Description - Lang SELECTRONIC Installation, Operation And Maintenance Instructions

Gas griddle, spark ignition
Table of Contents

Advertisement

3.1 Exterior Construction
The griddle dimensions are 17" (43.18cm) High, 30" (76.20cm) Deep, and
width is dependent on the actual model number.
The Sides, Bottom, and Rear walls are constructed of double wall stainless
steel, which allows closer installation to combustible surfaces.
The stainless steel drop-down door keeps the controls cool and the control
area clean.
The griddle surface is made of 1" thick, highly polished steel to reduce hot
and cold spots, recovery problems, warping, and ensure even heat to the
edges of the griddle.
3.2 Operation
Each twelve-inch section has its own temperature selector switch that snaps
into place to lock in any temperature from 175°F to 450°F in 25° increments.
Each twelve-inch section of the griddle is controlled by an area sensitive
RTD probe which can sense and react to a temperature change of 4°F.
3.3 Controls
The SELECTRONIC Griddle comes with the solid state controls which
include:
An on/standby switch for the entire unit.
Temperature selector switches for each twelve-inch section.
3.4 Technical
Griddle operates on either Natural gas or Propane. This must be specified
when ordering. It is shipped with a Power Cord and Plug attached.
Floor space required is 30" (76.20cm) Deep, and width is 2 ft, 3ft, 4ft, 5ft, or
6ft depending on actual model number.
The griddle weighs 260, 390, 520, 650, 780 lbs. depending on actual model
number.
3.5 Griddle Gas and Voltage Specifications
The Lang Model can be connected to any 120 Volt source. The gas and
electrical specifications are listed in the table below
Lang Model: 224S, 236S, 248S, 260S, 272S

EQUIPMENT DESCRIPTION

7

Advertisement

Table of Contents
loading

This manual is also suitable for:

236schg chrome236s260s224s248s272s

Table of Contents