Troubleshooting - Lang 224SHE Installation & Operation Instructions

Selectronic gas griddle
Table of Contents

Advertisement

TROUBLESHOOTING

Symptoms
The chart below is to assist in the troubleshooting of the griddle.
Refer to the Symptoms column to locate the type of failure then to the Possible Cause for the items to be
checked.
To test for a possible cause, refer to the TEST section (on the following page) and locate the Possible Cause
then refer to test to identify test procedures.
SYMPTOM
Entire griddle not lighting
Power indicator is not lit
Section will not heat
Product burning
Product under done
Doesn't ignite
POSSIBLE CAUSE
Failed regulator or plugged regulator vent
Failed transformer
No power to cord outlet
Griddle unplugged from outlet
Failed power cord or plug
Failed power switch
Failed pilot light
Failed gas valve
Failed spark module
Failed circuit board
Failed temperature sensor
Plugged pilot orifice
Product is cooked too long
Failed temperature sensor
Failed circuit board
Failed temperature selector
Open wire between selector and circuit board
Failed temperature sensor
Failed circuit board
Failed temperature selector
Incorrect Gas pressure
Failed igniter
Improper gas pressure
No power
Failed spark module
14

Advertisement

Table of Contents
loading

Table of Contents