GDD Instrumentation MPP-EM2S Plus Instruction Manual page 62

17.3 Bluetooth Partnership
To avoid wasting time on searching for Bluetooth devices, a Bluetooth partnership must be
established between the Archer2 field computer and the MPP probe before connecting. This
partnership was set up by GDD before the unit was sent out. However, it is possible that you
might have to reconfigure it and here are the instructions:
1. Turn on the MPP probe and place the Cable/Wireless switch in Wireless position.
2. Turn on the Archer2 field computer.
Instrumentation GDD Inc.
3. Make sure the Bluetooth is on. If the icon
is gray, tap on the icon to enable it.
4. Tap on the Bluetooth icon in the Title bar.
5. Tap on Add new device...
2018-01-16 61