GDD Instrumentation MPP-EM2S Plus Instruction Manual page 26

10.4 Memory
To be able to download the recorded readings in your personal computer, a file must be created with
the readings. This step is done with the Memory page. The Memory parameters are set at the end of
the process (when the readings are recorded).
1: Identification
If you have already entered a name for your readings series in the Reading page, it will appear in
this field. If not, you can enter a new name. The name entered in this field will be the same as the
created file. The .txt extension must still be written at the end of the name.
2: Memory range
By default, this range contents all the recorded readings. It is possible to select only a little section
of the entire range to create the file. The numbers indicate the number of each memory and not
the depth of each reading. If the Range Error message appears, check if the numbers of the
memories you selected are existing.
3: Repartition
The Repartition case must be checked only if you use continuous mode. This will distribute the
readings equally between the marked positions (Stamps) in the dumped file. Checking the
Repartition case when using the manual mode could cause erroneous positions in the dumped file.
Instrumentation GDD Inc.
1
2
3
2018-01-16
4
5
25