GDD Instrumentation MPP-EM2S Plus Instruction Manual page 47

12.5 Convert the Archer
2
The Archer has a slot for a micro SD card located in the battery compartment. To insert or remove a
card follow these steps (As per the Archer
1) Power off the handheld by holding the power button until the Power Button menu appears and
selecting Power Off. CAUTION: Power-off the Archer
remove the battery without powering-off the handheld, you may damage the handheld and/or
lose data.
2) Loosen the screws to the battery compartment, and remove the door. The hand strap remains
attached. CAUTION: The Archer
not installed properly.
3) Remove the battery pack.
4) An image on the battery compartment label shows the correct location and orientation for the
SD card (slot on the right). Push the card into the slot to insert it. To remove the SD card, pull it
out.
5) Replace the battery pack, and attach the battery door.
6) Power up the handheld.
Once, the SD card is installed. In the main screen of the Archer
1. In the main screen of the Archer
2. Go in the ''connections'' folder and then select the ''USB to PC option''.
3. Select ''SD Card - Use as external drive (Mass Storage)''
2
4. The Archer can now be accessed from the Windows File Explorer.
Instrumentation GDD Inc.
2
as a USB drive
2
User Guide):
2
is not sealed against water and dust when the battery door is
2
, go in the Settings menu
2018-01-16
2
before removing the battery. If you
2
, go in the Settings menu.
46