GDD Instrumentation MPP-EM2S Plus Instruction Manual page 27

4: File creation
Start the file creation by clicking the File Creation button. Make sure that you correctly set the
Identification and Memory range parameters before starting the file creation. If the file is created
after many hours of operation (with a lot of recorded readings), it is possible that the file will take
up to twenty minutes to be created. The message File complete will appear. See following images
to find the created file:
See Section 12 – Software installation and file transfer to know how to transfer a file from the
2
Archer field computer to a desktop computer.
5: Clear memory
After the file creation process, restore the readings recorder to zero by clicking the Clear memory
button. Before doing that, make sure that the file is well created. A Confirmation message appears
when the Clear memory button is clicked to prevent errors. If the memories are not cleared, the
next recorded readings will be added to the readings still in the memory.
Instrumentation GDD Inc. 2018-01-16 26