GDD Instrumentation MPP-EM2S Plus Instruction Manual page 37

11.4 Single Reading mode
The single reading mode initializes the probe and allows taking a single reading. After the probe is
initialized, you have 15 seconds to take a reading before you have to reinitialize the probe. The
reading values will be displayed on the screen with a resolution of 10
-3
10 x 10 SI. The reading will remain there until the probe is initialized again.
1
1. Single reading Mode
A check will appear next to this option if it is active.
2. Display
The reading display is frozen in this mode. If "-----"is shown in the fields, the probe is initialized
and is ready to take a reading.
Instrumentation GDD Inc. 2018-01-16
-6
SI for readings lower than
2
3
4
36