GDD Instrumentation MPP-EM2S Plus Instruction Manual page 38

3. Readings space (Initialization)
Pressing the GDD Logo or the readings space will initialize the probe and start the 05 seconds
timer. Touching the readings space again will reinitialize the probe and reset the 05 seconds timer.
4. Memory button
Pressing the Memory space on the Archer
for the first time will initialize the probe. A beep is emitted when the initialization is done. Pressing
the Memory space on the Archer
take a reading and store it in memory. A beep will confirm that the reading has been saved.
Steps: how using this mode
1. Select Single Reading from the CFG menu to activate this mode.
2. Move the end of the probe far from metal objects and initialize it by taping on the GDD logo
or on the MEM button of the probe.
Instrumentation GDD Inc.
2
field computer or push the MEM button on the probe
2
field computer or push the MEM button on the probe again will
+
2018-01-16
OR
37