Starting - GDD Instrumentation MPP-EM2S Plus Instruction Manual

8. Starting

8.1 Starting– Wireless (Bluetooth) mode
*** It is highly recommended to leave the probe ON during one hour before taking the first
measurement.
Instrumentation GDD Inc.
1. Turn and pull the cap of the battery holder, and insert 3 AA
batteries into the probe. Push and turn the cap to close it.
Or, plug the wall external power supply in the power jack.
2. Place the Cable – Wireless – Prog switch in Wireless
position.
3. Turn on the probe with the On/Off switch placed on the
right side of the probe.
2018-01-16 17