Quick Start - GDD Instrumentation MPP-EM2S Plus Instruction Manual

7. Quick Start

1. Insert three fully charged AA batteries into the probe and a fully charged Li-ion battery into the
Archer2 field computer. (Section 4 – Batteries)
2. Place the Cable / Wireless / Prog Switch on Wireless position. (Section 5.2 – Cable / Wireless / Prog
Switch)
3. Turn on the probe and the Archer
field computer characteristics)
4. Tap on the MPP icon in the Favorites bar of the Home page of the Archer
5. Enter the sample diameter or select the Wall option for a flat surface and click Confirm.
6. Move away the probe from any conductive or magnetic material (point it in the air) and click in
the GDD logo space to initialize.
7. Configure parameters, i.e. file name, spacing, mode, etc. (Section 10 – Setting parameters)
8. Take and record readings. (Section 11 – Reading modes)
9. Create a file to save readings. (Section 10.4 - Memory)
10. Transfer the file to your computer using the USB cable. (Section 12 – Software installation and file
transfer).
Instrumentation GDD Inc.
2
field computer. (Sections 5.1 – ON/OFF Switch and 6 – Archer
2018-01-16
2
field computer.
2
16