Table of Contents
Advertisement
Setting the Relays
#1 Ch 1 Set up Menu
The relays are found in the
Set up menu of the channel
to which they were assigned
Simultaneously press both
Horizontal CALIBRATE keys
to access the menu.
#3 mA Range Screen
Press Menu Select
Down button, twice
#5 Choose High/Low Alarm
Press the horizontal
CALIBRATE key to move the
cursor under the >.
#7 Low Alarm value
Press the horizontal
CALIBRATE key to move the
cursor under the 0.
#9 Accept the Value
Press Menu Select
Down button
#11 Set the Hysteresis
Simultaneously press both
Horizontal CALIBRATE keys
#2 Plot Screen
Press Menu Select
Down button, twice
#4 Relay 1 Set up Screen
1 On = Set Point
1 Off = Hysteresis point
To access the menu
Simultaneously press both
Horizontal CALIBRATE keys
#6 Set High/ Low Alarm
Press the down CALIBRATE
key to change to <. Notice
the Hysteresis sign also
changed.
#8 Low Alarm Value
Press the vertical CALIBRATE
keys to adjust the value
#10 Move to Hysteresis
Line
Press Menu Select
Down button
#12 Adjust the value
Press the horizontal
CALIBRATE key to move the
cursor under the digit to be
changed.
Page 16
FCA‐22 Instruction Manual
Advertisement
Table of Contents
