Alarm Relays
The FCA‐22 has two assignable relays.
by the customer at the time of order. The SPDT relays are fully configurable, see C‐22 manual for a more detailed
description. The Relays must be first assigned in the Configure/Trim Menu and then configured in the Step Up
Menu. Follow the example below for guidelines on assigning and configuring the relays.
Screen Shots for Assigning the Alarm Relays
#1 Home Screen
Press Menu Select
Down button
#3 Selection Menu
Buffer
Press Menu Select
Down button
#5 Selection Menu
Status
Press Menu Select
Down button
#7 Passwords Screen
Press Menu Select
Down button
#9 4‐20 Assignment Screen
Press Menu Select
Down button
Both relays are set to "unused" by the factory unless specified otherwise
#2 Graphical Display
Press Menu Select
Down button
#4Selection Menu
Set up
Press Menu Select
Down button
#6 Configure/Trim Menu
To enter the Configure
Menu Simultaneously press
both Horizontal CALIBRATE
keys
#8 Default Display Screen
Press Menu Select
Down button
#10 Manual Mode Screen
Press Menu Select
Down button
Page 14
FCA‐22 Instruction Manual