Invacare® Storm®⁴ Series
5.9.5 Adjusting the height (following armrest)
Tools:
•
5 mm Allen key
•
13 mm wrench
1. Loosen the screw A and nut B and remove them.
2. Adjust armrest to desired height.
3. Insert screw and nut and tighten.
5.9.6 Changing the resistance (flip-up/following armrest)
The movement of the flip-up and following armrests can be
set to have greater or less resistance.
Tools:
•
5 mm Allen key
48
1. To make the armrest easier to move, release the screw
A with the Allen key.
2. To make the armrest more difficult to move, tighten the
screw A with the Allen key.
5.9.7 Adjusting the arm pad angle (flip-up/following
armrest)
Tools:
•
5 mm Allen key
1529686-U