Adjusting The Depth Of The Tray; Swinging The Tray Away To The Side; Seat Support; Adjusting Seat Width - Invacare Storm 4 Series User Manual

Invacare® Storm®⁴ Series
5.15.2 Adjusting the depth of the tray / removing the tray
1. Loosen wing-screw A.
2. Adjust tray to desired depth (or remove it entirely).
3. Re-tighten screw.

5.15.3 Swinging the tray away to the side

The tray can be swivelled up and away to the side to allow
the user to get in and out of the mobility device.
CAUTION!
Risk of injury! When the tray is raised it does
not lock in place in this position!
– Do not tilt the tray up and leave it leaning in
this position.
– Never attempt to drive with the tray tilted up.
– Always lower the tray in a controlled manner.
64

5.16 Seat support

5.16.1 Adjusting seat width

Also refer to the following chapter entitled 5.16.2
Adjusting the seat depth, page 65.
The seat width can be adjusted in stages between
380 and 530 mm.
Tools:
• 4 mm Allen key
Fig. 5-2 Exploded drawing of seat support
1. Remove the seat cushion.
2. Remove the cover plates (1).
1529686-U