Adjusting The Height (Following Armrest); Changing The Resistance (Flip-Up/Following Armrest); Adjusting The Arm Pad Angle; Armrest) - Invacare Storm4 X-plore User Manual

Invacare® Storm®⁴ Series

5.5.5 Adjusting the height (following armrest)

Tools:
•
5 mm Allen key
•
13 mm open-ended spanner
Loosen the screw A and nut B and remove them.
1.
2. Adjust armrest to desired height.
3. Insert screw and nut and tighten.
5.5.6 Changing the resistance (flip-up/following

armrest)

The movement of the flip-up and following armrests can be set to
have greater or less resistance.
36
Tools:
•
5 mm Allen key
To make the armrest easier to move, release the screw A with
1.
the Allen key.
2. To make the armrest more difficult to move, tighten the screw
A with the Allen key.
5.5.7 Adjusting the arm pad angle (flip-up/following
armrest)
Tools:
•
5 mm Allen key
1529686-R