Adjusting The Position Of The Arm Pad Of The Flip-Up; Armrest; The Hip Support - Invacare Storm 4 Series User Manual

1. Loosen screws A.
Do not remove them.
2. Adjust arm pad to desired angle.
3. Tighten screws.

5.9.8 Adjusting the position of the arm pad of the flip-up

armrest

• 5 mm Allen key
1. Put the armrest in the vertical position.
2. Release the interior bolts (1) with the Allen key.
1529686-U
3.
Position the armrest horizontally.
4. Re-tighten the bolts.
Make sure that the Nordlock washers used are
re-inserted.

5.9.9 The hip support

The hip support can be combined with the flip-up armrest
only.
Setup
49