Adjusting Or Removing The Luggage Carrier - Invacare Storm 4 Series User Manual

Invacare® Storm®⁴ Series
Risk of breakage due to excessive load
The KLICKfix adapter can break if too great a load
is applied.
– The maximum permitted load on the KLICKfix
adapter is 1 kg.
Securing the accessory:
1. Push the accessory into the KLICKfix adapter.
The accessory locks in securely.
Removing the accessory:
1. Press the red button and remove the accessory.
The adapter can turn in 90° steps, allowing you to attach an
accessory from any of four different directions. Please refer
to the installation instructions which are available from your
Invacare provider or directly from Invacare.
More information on the KLICKfix system is available at
http://www.klickfix.com.
30

4.4 Adjusting or removing the luggage carrier

Risk of damage as a result of collisions
Parts of the mobility device may be damaged if
the luggage carrier collides with the seat during
seat angle or backrest adjustment.
– Ensure that the luggage carrier is out of
the range of both seat angle and backrest
adjustment.
Risk of breakage due to excessive load
The luggage carrier can break if too great a load
is applied.
– The maximum permitted load on the luggage
carrier is 10 kg.
1. Open the clamp levers (1) of the luggage carrier bracket.
2. Slide the luggage carrier forward or backward or remove
it.
3. Close the clamp levers of the luggage carrier bracket.
1529686-U