Adjustment Options For The Modulite Seat Unit; Adjusting The Height Of The Armrests; Adjusting The Width Of The Armrests - Invacare Storm 4 Series User Manual

Hide thumbs Also See for Storm 4 Series:
Table of Contents

Advertisement

Invacare® Storm®⁴ Series
5.9 Adjustment options for the Modulite seat
unit

5.9.1 Adjusting the height of the armrests

1. Loosen wing screw A.
2. Adjust armrest to desired height.
3. Re-tighten wing screw.

5.9.2 Adjusting the width of the armrests

WARNING!
Serious injury hazard if one of the armrests
falls out of its bracket because they have
been adjusted to a width which exceeds the
permissible value
– The width adjustment is fitted with red
markings A and the word "STOP". The
armrests must never be pulled out further
than the point at which the word "STOP" is
completely legible.
– Always tighten the fixing screws properly once
adjustments have been completed.
46
Depending on the side, the screw is accessible from
the front or the rear.
8 mm Allen key
1529686-U

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storm 4 x-ploreStorm 4 true track plus

Table of Contents