Valve Replacement; Installing Valve - Regency Energy E18E Owners & Installation Manual

VALVE REPLACEMENT

1. Shut off the gas and electrical supply.
2. Remove Faceplate Control Cover (see instructions in manual).
3. Remove Glass Door (see instructions in manual).
4. Remove Log Set and Embers or crystals and stones (if installed).
5. Remove Burner and Panels (see instructions in this manual).
6. Unplug the Orange, Green, and Ground wires on the front of the Valve.
Green
Orange
Ground
7. Unscrew the 8 screws holding down the Valve Tray.
8. Slide the Valve Tray out about half way giving easier access to the gas
connection at the valve.
9. Disconnect the gas line and remove the valve tray.
Diagram 19.1
Diagram 19.2
Diagram 19.3

INSTALLING VALVE

1. Place new valve tray and gasket into position.
2. Reverse Steps 9-1.
3. Check for gas leaks.
Regency
maintenance
E18E Gas Fireplace Insert
®
|
75
| 75