Table of Contents
Advertisement
installation
|
62
GLASS CRYSTALS AND OPTIONAL CERAMIC SPA OR VOLCANIC
STONES INSTALLATION ON BURNER AND FIREBOX FLOOR
Evenly spread the Glass Crystals or optional Ceramic Spa Stones over the burner.
Ensure the crystals (or stones) do not overlap too much as this will effect the flame pattern.
IMPORTANT NOTE:
Only the supplied approved Glass Crystals and Ceramic Spa Stones are to be used with these fireplaces. Use of any other type of glass crystals or stones
can alter the unit's performance, any damage caused by the use of any unapproved glass or stones will not be covered under warranty.
When using Ceramic Spa Stones DO NOT cover burner ports or pilot light that lead to pilot flame. Ensure the crystals or stones do not overlap excessively
as this will effect the flame pattern.
Unit
*Glass Crystals
E18E
5 lbs
NOTE: * Glass Crystals are available in 1lb and 5lb bags.
** Ceramic Spa stone package contains 70 stones
Diagram 15.1
Diagram 15.4
3. Spread Crystals evenly over the
burner and firebox base
NOTE: Correct final glass installation of Crystals shown in step 3 and 4. The Burner and Firebox Floor should not be visible when the flame is out.
OPTIONAL SPA OR VOLCANIC STONES INSTALLATION (AROUND BURNER)
NOTE:
62 |
Regency
®
E18E Gas Fireplace Insert
BURNER PACKAGES
1. Start installing Crystals on back of
Burner and Firebox Floor
4. Ensure Crystals DO NOT block the
front of the pilot hood and flame to
Diagram 15.7
Spa or Volcanic Stones are NOT to be placed anywhere on the burner tube or Pilot assembly area.
**Ceramic Spa Stones
70 spa stones
Diagram 15.2
Diagram 15.5
light the burner
Volcanic Stones
1 box
Diagram 15.3
2. Distribute Crystals evenly towards
front of Burner and Firebox Floor
Diagram 15.6
Glass Crystals shown on Burner and Firebox Floor
Diagram 15.8
Advertisement
Table of Contents
