Suspend/Resume Control - Intermec TRAKKER Antares 2420 User Manual

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User's Manual
Subnet Mask (continued)
3. Scan this bar code:
4. Repeat Steps 2 and 3 to set the next three numbers in the subnet mask address field.
5. Scan this bar code:

Suspend/Resume Control

Purpose: Controls the operation of the
key. When the
is enabled so that you can turn the terminal on and off.
EFdata
Syntax:
Acceptable values for data are:
0
1
Default: Enabled
Scan: One of these bar codes:
Enable
*$+EF0*
*$+EF0*
9-108
*6*
*6*
*8*
*8*
. (Period)
*.*
*.*
After you scan the last address segment, go to Step 5. Do not scan the period after
the last address segment.
Exit Accumulate Mode
*-/*
*-/*
L
key is disabled, you cannot turn off the terminal. By default the
Enabled
Disabled
L
Key
C o d e 39
*7*
*7*
*9*
*9*
L
key (suspend/resume). You can enable or disable the
Disable
*$+EF1*
*$+EF1*
Nugget
L
Key
L
L
key